| Stimulation Parameters | ||
| Pulse duration | ||
| Standard biphasic | : | 250–330 µs |
| Maximum frequency at maximum power | : | 5Hz² |
| With Extra Power Upply Unit | : | 20Hz² |
| Power Supply | ||
| Supply voltage | : | (220±22)/(230±23) V |
| : | 50 or 60 Hz | |
| Maximum power consumption during the stimulation: | : | |
| Main unit | : | ≤1000 V·A |
| Cooling unit | : | ≤1000 V·A |
| Extra Power Supply Unit | ≤3000 V·A | |
| Trig-in/out | ||
| Trig-in | : | TTL/CMOS |
| Trig-out | : | TTL/CMOS |
| Trig-in pulse width | : | ≥ 200 µs |
| Stimulus delay relative to trig-in signal | : | 100...200 µs |
| Trig-out pulse width (user-defined) | : | 10 µs…50 ms |
| General Specifications and Parameters | ||
| Interface | : | USB |
| Safety | : | I |
| Work parts | : | BF type |
| Cooling unit tank volume while filling up to the maximal level | : | 3.5 l |
| Type of cooling agent | : | Silicone oil 5 cSt |
| Ingress protection | : | IP20 |
| Operation temperature | : | (10–35)º C |
| Relative air humidity | : | ≤80% |
| Cooling agent pressure in coil while cooling unit operating | : | not more than 0.15 MPa |
| Stimulation Parameters | ||
| Stimulation frequency in repetitive stimulation mode | ||
| Range of Permissible Values | : | (0.1–30) Hz (Stand-alone mode) & (0.1 – 100) Hz (PC Mode) |
| Frequency Step | : | 0.1 Hz (0.1 -10 Hz) & 1 Hz (10-100 Hz) |
| Stimulation frequency in burst* mode | ||
| Range of Permissible Values | : | 50 – 100 Hz PC Mode |
| Frequency Step | : | 1 Hz |
| Pulse train duration range | ||
| Range of Permissible Values | : | (0.5 - 100)s |
| Frequency Step | : | 0.5s(0 - 29.5s) & 0.1s(1.00 - 9.90s) |
| Inter-train interval range | ||
| Range of Permissible Values | : | (0 - 300)s |
| Frequency Step | : | 0.5s(0 - 29.5s) & 0.1s(30 - 100s) |
| Session (0.5-40) min 0.5 min | ||
| Range of Permissible Values | : | (0.5 - 40) min |
| Frequency Step | : | 0.5 min |
| Capacitor Charge Control | ||
| Delay for the capacitor charge start (analysis epoch)** | ||
| Range of Permissible Values | : | (0–9.90) s |
| Frequency Step | : | 0.01 s (0–0.99 s), 0.1 s (1.00–9.90s) |
| Trig-out | ||
| Trig-out pulse width | ||
| Range of Permissible Values | : | 10 μs, 1 ms–50 ms |
| Frequency Step | : | 1 ms |
| Neuro-MS/D main unit | : | 1 |
| Neuro-MS/D cooling unit | : | 1 |
| Neuro-MS/D Extra Power Supply unit | : | 1 |
| End cap | : | 1 |
| Patient cap | : | 20 |
| Silicone oil canister | : | 1 |
| Angulated figure-of-eight cooled coil | : | 1 |
| Cooled ring coil | : | 1 |
| Cooled Double Cone Coil | : | 1 |
| Hydraulic system adapter | : | 2 |
| HV Cable for extra power supply unit | : | 1 |
| Control cable for Neuro-MS/D cooling unit | : | 1 |
| Equipotential cable | : | 2 |
| Mains supply cable | : | 3 |
| USB сable | : | 1 |
| Coil holder (trolley/wall mounted) | : | 2 |
| flexible arm for coil positioning | 1 | |
| User manual «Neuro-MS.NET» soft copy | : | 1 |
| License for Neuro-MS.NET | : | 1 |
| coil positioning tool | : | 1 |
| Neurosoft equipment cover | : | 1 |
| Silicon oil | 1 | |
| Cable Trigger | 1 | |
| EMG Configuration: | ||
| Unit MEP | : | 1 |
| Starter Kit EMG | : | 1 |
| License for EMG | : | 1 |
| Navigation Configuration: | ||
| Neuronavigation Visor 2 System | : | 1 |
| Visor Essential accessories | : | 1 |
| Visor basic license set on USB dongle | : | 1 |
| Aksesoris Lokal: | ||
| PC All in One | : | 1 |
| Printer | : | 1 |
| UPS | : | 1 |
| Trolley TMS | : | 1 |
| Comfort Treatment Chair | : | 1 |